Sample generated by the Tester software.
Sample generated by the Tester software.
What comes off the printer
These two sheets are real outputs of the software, produced from a set of bench readings for a borewell submersible pumpset tested to IS 8034. They are shown as samples: the model names, duty values and readings on them are illustrative, and your own reports would carry your company name, address, logo and BIS licence details in the header.
The report sheet lists each trial with its observed discharge, total head, voltage, current, input power and speed, and the values derived from them. The graph sheet plots discharge against total head, against overall efficiency and against current on one set of axes, with the declared duty point marked, so that a pass or fail is visible without reading a column of figures.
Every standard has its own set. The standards page lists what is produced under each one.
Every report and graph the software produces
What each sheet is called, which standards it applies to and what it carries.
| Report or graph | Standards | What it shows |
|---|---|---|
| Pump performance chart | IS 8034, 8472, 9079, 12225, 14220, 6595 | The observed readings for each trial with the derived total head, overall efficiency and input power, against the declared duty. |
| Pump performance graph | IS 8034, 8472, 9079, 12225, 14220, 6595 | Discharge plotted against total head, overall efficiency, current or input power, with the duty point marked. |
| Pump testing report | IS 8034 | The full performance test record for a submersible pumpset, in the format the standard prescribes. |
| Self priming pump test report | IS 8472 | Priming time and performance for self priming sets; a separate format is used for non-self-priming sets. |
| Motor performance chart | IS 996, IS 9283 | Motor readings with efficiency, power factor, speed and, for IS 9283, the observed value against each limit. |
| Motor testing report, single and customised | IS 8472, 9079, 12225, 6595 | The motor record for a set whose motor is tested as its own item, in a single or customised layout. |
| Routine testing report, single and customised | All eight standards | The batch-by-batch production record, printed at the bench as each set is tested. |
| Declared versus observed bar chart | IS 8034, IS 8472 | Declared duty against observed duty for each point, read at a glance. |
| Declared versus observed pie chart | IS 8034, IS 8472 | The same comparison as a proportion, used in internal quality reviews. |
| Pump maximum and minimum values report | IS 8034, 8472, 9079, 6595 | The highest and lowest observed values across a batch, which is where a drifting process shows first. |
| Pump observed values report, type-wise | IS 8034, 8472, 9079, 6595 | Every observed reading for a pump type over a chosen period. |
| Pump comparison graph, 2 pumps | All pump standards | Two pumps on one set of axes: total head, overall efficiency, current or input power. |
| Pump comparison graph, 10 pumps | All pump standards | A whole range on one sheet, which is how a design change is judged and a catalogue built. |
| Jet pump DLWL comparison, 10 pumps | IS 12225 | Discharge against depth to lowest water level across ten jet pump models. |
| All-units graph | IS 8034, 8472, 9079, 6595 | One graph carrying lps, lph, cubic metres per hour and US gallons per minute together, for export buyers. |
Scroll the table sideways on a small screen to see every column.
Which of these are available depends on the edition. See the edition comparison.
Units on the graphs
Discharge can be plotted in any of these, or all of them on one sheet:
lpslphm³/hrUS gpm
Which units are offered depends on the standard. IS 8034 works in litres per second, IS 12225 in litres per hour, and the export options add the buyer's units on top.
Getting your own samples
Send us a set of readings from one of your own pump models, with the declared duty values, and we will produce the report and the graph as the software would print them for you. That is usually more convincing than any sample of ours.
Request a demonstration of Tester
Tell us your pump types and the IS standards you test to. We will arrange a demonstration for your plant, in person in Tamil Nadu or online anywhere in India.